To Next PageTo Next PageWhat to do if Kyocera M2535dn cannot perform broadcast transmission?
If your Kyocera All in One Printer displays 'Cannot perform broadcast transmission', it means there is not enough free space available in the memory. You should send after the memory has free space, or create free space in the memory.
What to do if 'Job Accounting restriction exceeded' on Kyocera M2535dn All in One Printer?
If your Kyocera All in One Printer displays 'Job Accounting restriction exceeded', press the OK key to cancel the job. Then, try performing the job again after resetting the limit for paper use.
Why Kyocera M2535dn All in One Printer paper often jams?
Paper jams can occur in your Kyocera All in One Printer for several reasons: * The paper might not be loaded correctly. Make sure to load the paper correctly. * The paper type might not be supported, or the paper may not be in good condition. Try removing the paper, turning it over, and reloading it. * The paper could be curled, folded, or wrinkled. Replace the paper with new paper. * There might be loose scraps or jammed paper in the machine. Remove any jammed paper.
Why my Kyocera M2535dn cannot send document?
If your Kyocera All in One Printer cannot send a document, ensure the modular cord is correctly connected. If a communication error is displayed, resolve the error and try sending again. Also, check if TX (transmission) restriction is activated and, if so, cancel it.
How to fix 'Add paper in cassette' error on Kyocera M2535dn All in One Printer?
If your Kyocera All in One Printer displays 'Add paper in cassette 1 (~3). or Add paper in MP tray.' message, it means the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If the type of printing paper is specified, the necessary paper types are also displayed. To use another paper source, select the paper source and press the OK key. Alternatively, press [Paper] (the Right Select key), select the desired paper source, and then press the OK key. It could also mean that the cassette for the specified paper type is not available. Press [Paper] (the Right Select key), select another paper source, and then press the OK key. It may also mean that the cassette is not securely loaded. Remove the cassette and reload it completely.
What to do if Kyocera All in One Printer cannot feed paper set cassette 1?
If your Kyocera All in One Printer cannot feed paper set cassette 1, check if any of the paper feeders or the printer cassette upper than the selected one properly closed when one or more optional feeders are installed and close the paper feeder properly.
What to do if Kyocera M2535dn All in One Printer cannot feed originals?
If your Kyocera All in One Printer cannot feed originals, when placing originals in the document processor, align the original width guides securely before placing the originals.
How to fix Kyocera All in One Printer dirty printouts?
If the printouts from your Kyocera All in One Printer are dirty, the platen or the document processor might be dirty. Clean the platen or the document processor.
What to do if Kyocera All in One Printer printouts are wrinkled?
If the printouts from your Kyocera All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if Kyocera M2535dn doesn't respond?
If the operation panel of your Kyocera All in One Printer does not respond when the power switch is turned on, plug the power cord into an AC outlet.
General| Printer Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Automatic Duplex Printing | Yes |
| Display | LCD |
| Processor | 600 MHz |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 Kbps |
| Print Speed (Black) | 35 ppm |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
