Kyocera P5026cdw - Configure Wi-Fi Direct Administrator Settings; Set Wi-Fi Direct Admin ID and Password

FAQs P5026cdw
19
NOTE
+ Enter a password consisting of between 1 and 16 numbers.
+ Select the [▲] or [▼] key to enter a number.
+ Select the [◄] or [►] key to move the cursor left or right.
+ The factory default settings for the administrator ID is set as shown below.
Model Name
Administrator ID
ECOSYS P5021cdn/ECOSYS P5021cdw
2100
ECOSYS P5026cdn/ECOSYS P5026cdw
2600
4. Enter the administrator ID (2600) and select the [OK] key. 7. Press the down arrow to select ON, Press OK.
5. Enter the administrator password (2600) and select the
[OK] key.
6. Press the OK key. A blinking “?” will appear.
8. Restart the printer.