Need help?Do you have a question about the Kyocera P5026cdw and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Monthly Duty Cycle | Up to 50, 000 pages |
| Processor Speed | 800 MHz |
| RAM | 512 MB |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Paper Capacity | 250 sheets |
| Max Media Size | 8.5 x 14 inches |
| Connectivity | USB 2.0, Ethernet, Wi-Fi |
| Mobile Printing | AirPrint, Google Cloud Print, Mopria, KYOCERA Mobile Print |
| Toner Capacity | Black: 4, 000 pages, Color: 3, 000 pages |
| Print Speed | Up to 27 ppm |
Check for Kyocera Hologram on toner bottle to confirm authenticity.
Remove, shake, and re-install toner container to resolve low toner alerts.
Confirm the printer's right cover is fully closed for proper operation.
Ensure the toner cartridge is properly seated in the printer.
Print the status page to check current toner gauge levels on the printer display.
Steps to locate the printer's IP address and navigate to the Command Center RX webpage.
Instructions to find the serial number on the multi-purpose tray or printed status page.
Detailed steps for downloading and installing the Windows print driver for the P5026cdw.
Steps to fix poor image quality, including checking toner, paper, and printer settings.
Explains error messages, blinking lights, and common error scenarios on the printer.
Steps to resolve problems when the printer fails to power on.
Instructions for clearing paper jams located in the multipurpose tray.
Procedures for clearing paper jams located within Cassette 1.
Steps to clear paper jams found at the rear cover of the printer.
Procedures for clearing paper jams located within the duplex unit.
Steps for installing the Wi-Fi Setup Tool software on your computer.
Steps to configure Wi-Fi connection using the Wi-Fi Setup Tool on Windows.
Detailed steps for configuring basic Wi-Fi settings using the Wi-Fi Setup Tool.
Steps for selecting the printer, entering login details, and configuring network authentication.
Step-by-step guide to enable Wi-Fi Direct functionality on the printer itself.
Steps to enter administrator ID, password, and configure Wi-Fi Direct settings.
How to find the Wi-Fi Direct SSID/password and connect the computer to it.
Steps for installing the Wi-Fi Setup Tool software on your computer.
Steps for selecting connection methods and device discovery options in the Wi-Fi Setup Tool.
Selecting the printer and network SSID, then entering authentication details.
Final steps of the Wi-Fi Setup Tool, confirming the connection and saving settings.
Solutions for incorrect login errors on the Command Center webpage, including default credentials.
Guide on loading special media into the multipurpose tray and configuring print driver settings.
Steps for downloading and installing the print driver on Apple OS.
Finalizing the driver installation and setting up the printer in System Preferences.
Steps to add a printer using the default Bonjour protocol or USB connection.
Verifying printer options, supply levels, and printing a test page.
To Next Page