+ After any one of the previous install procedures, it leads
us to this screen. The printer has been installed. Here you
can verify the PPD and the Options.
+ Press options and supplies, in the General tab you can
change the name or location and check the version of
the driver.
+ In the Options tab you can change the installed options
Supply levels will show current status of toner and
waste toner.
From this area you can also print a test page. Select open print
queue, the print spooler dialog will open, from the top menu on
computer select Printer then print test page. A test page will
be sent to the printer.
To Next Page
Loading...
