MA2000W/PA2000w Wireless Setup (Windows)
4. Select your access point (Name of your wireless network)
you want to connect the device, and then click Next >.
5. Enter the pre-shared key (Your wireless password), and
then click Next >.
6. Select the check boxes of functions you want to use with
Wireless Network connection, and click Finish.
7. The network between this machine and the computer is
now configured.
8. The USB cable can now be removed and your device can
be placed in your preferred location.
Wireless Setup (Using WPS)
If your router supports WPS, you can configure network connection
using the WPS push button on your router.
1. Turn on the computer.
2. Press Wireless Network on the operation panel of
the machine. The wireless network indicator flashes.
3. Press the WPS button on the router.
4. The network between this machine and the router is being
configured. If the network connection between this machine
and the router completes, Wireless Network will
light up.
Support
1. To Register your Product, go to:
https://www.kyoceradocumentsolutions.us/en/support/regist
er
2. For additional Information, please go to the URL for the
Product Support Page.
www.kyoceradocumentsolutions.us/en/products/mfp/MA2000
W
https://www.kyoceradocumentsolutions.us/en/products/print
ers/PA2000W
3. Speak to a Technical Representative
Call 1-800-255-6482
To Previous Page
Loading...
Need help?
General