Kyocera Xcursion KX160A Manual

User Guide for the Kyocera Xcursion Phone 35
Setting sounds for your phone
You can set your phone to sound tones when you
open and close the flip, and when you turn the
phone on and off. Sounds will not occur during an
incoming call, if you are in a call, or if a headset
or car kit is attached to your phone.
Set sound when flip opens
1. Select Menu → Settings → Sounds →
Flip Open.
2. Scroll through the list to hear the sounds.
3. Select a sound and press to save.
Set sound when flip closes
1. Select Menu → Settings → Sounds →
Flip Closed.
2. Scroll through the list to hear the sounds.
3. Select a sound and press to save.
Set sound when phone powers on or off
1. Select Menu → Settings → Sounds →
Pwr On/Off Sound.
2. Select Enabled. To deselect this sound,
select
Disabled.
Adjusting volume
You can adjust the earpiece, speakerphone,
and ringer volume as well as key tones.
Adjusting the earpiece volume
To adjust the earpiece volume manually during
a call, press the key up or down.
To set the earpiece volume:
1. Select Menu → Settings → Sounds →
Earpiece Volume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
Adjusting the ringer volume
1. Select Menu → Settings → Sounds →
Ringer Volume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
Adjusting speakerphone volume
1. Select Menu → Settings → Sounds →
Spkrphone Volume.
2. Press right to increase the volume,
or left to decrease the volume.
3. Press to select Save.
Adjusting key tone volume
You can change the volume of the tones the phone
makes when you press the keys.
1. Select Menu → Settings → Sounds →
Key Volume.

Kyocera Xcursion KX160A Specifications

General

Brand	Kyocera
Model	Xcursion KX160A
Category	Cell Phone
Language	English