Kyocera Xcursion KX160A Manual

User Guide for the Kyocera Xcursion Phone 1
1GETTING STARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery.
To install the battery:
1. Hold the phone with the back facing you.
2. Toward the bottom
of the phone there
is a recess to aid
you in opening the
battery door. Use
your finger to pull
the battery door
away.
3. Place the battery in
the phone casing
with the metal
contacts toward the
bottom of the
phone.
4. Place the battery
door tab in the
opening near the top of the phone.
5. Press the battery
door until it clicks
into place.
Charging the
battery
You must have at least
a partial charge
in the
battery to make or
receive calls.
Fully charge the battery before using
the phone.
To charge the battery,
connect the AC adapter
to the jack on the
bottom of the phone,
then plug the adapter
into a wall outlet.
The battery icon in the
upper-right corner of
the screen tells you
whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.

Kyocera Xcursion KX160A Specifications

General

Brand	Kyocera
Model	Xcursion KX160A
Category	Cell Phone
Language	English