—
1
—
１．Safety Warnings
This instrument has been designed and tested according to IEC
Publication 61010: Safety Requirements for Electronic Measuring
Apparatus. This instruction manual contains warnings and safety rules
which must be observed by the user to ensure safe operation of the
instrument and retain it in safe condition. Therefore, read through these
operating instructions before starting using the instrument.
● The symbol
#
indicated on the instrument means that the user must
refer to related parts in the manual for safe operation of the
instrument. Be sure to carefully read the instruction following each
#
symbol in this manual.
#
DANGER
is reserved for conditions and actions that are likely
to cause serious or fatal injury.
#
WARNING
is reserved for conditions and actions that can
cause serious or fatal injury.
#
CAUTION
is reserved for conditions and actions that can
cause bodily injury or instrument damage.
#
WARNING
● Read through and understand instructions contained in this
manual before starting using the instrument.
● Save and keep the manual handy to enable quick reference
whenever necessary.
● The instrument is to be used only in its intended applications.
● Understand and follow all the safety instructions contained in the
manual.
Failure to follow the instructions may cause injury, instrument
damage and/or damage to equipment under test. Kyoritsu is by
no means liable for any damage resulting from the instrument in
contradiction to this cautionary note.
To Next Page
Loading...
