Need help?Do you have a question about the KYORITSU KEW 2003A and is the answer not in the manual?
General| Type | Digital Clamp Meter |
|---|---|
| Measurement Functions | AC Current, AC Voltage, Resistance |
| Display | LCD |
| Max Voltage Measurement | 600V AC |
| Resistance Measurement | 400Ω |
| AC A | 1000A |
| Conductor Size | Up to 30mm |
| Withstand Voltage | 3700V AC for 1 minute |
| Applicable Standards | IEC 61010-1 CAT III 600V |
| Accuracy (Voltage) | ±1.5% |
| Safety Standards | IEC 61010-1 CAT III 600V |
Procedure to check instrument battery status and replace if necessary.
Ensures correct selector switch and mode settings for accurate measurements.
Step-by-step guide for measuring DC current using the clamp meter.
Procedure for measuring AC current using the clamp meter.
Instructions for measuring DC voltage with the clamp meter.
Instructions for measuring AC voltage with the clamp meter.
Guide on how to perform resistance measurements with the instrument.
Procedure for checking circuit continuity using the clamp meter's buzzer.
Method for capturing and displaying the maximum reading over time.
Information on the automatic power-saving sleep mode and its operation.
How to freeze and display the measured value on the screen.
Details on using the output terminal for current measurement monitoring.
To Next Page
