To Next PageTo Next Page
Need help?Do you have a question about the KYORITSU 3007A and is the answer not in the manual?
General| Test Voltage | 250 V, 500 V, 1000 V |
|---|---|
| Measurement Range | 0.1MΩ to 2000MΩ |
| Display | LCD |
| AC Voltage | 0 - 600V AC |
| Continuity | Yes |
| Safety Standard | IEC 61010-1 CAT III 600V |
Essential warnings and precautions for safe instrument use.
Critical warnings about conditions likely to cause serious or fatal injury.
Safety notices about conditions that can cause serious injury or fatal injury.
Specifications for nominal output voltage, measuring ranges, and accuracy.
Specifications for continuity resistance ranges, open-circuit voltage, and accuracy.
Information on operating errors according to IEC standards and applicable safety standards.
Step-by-step instructions for performing insulation resistance measurements safely.
Detailed procedure for conducting continuity and resistance tests.
