－ 38 －
8．Clock Setting
Follow the procedures below and adjust the internal clock of KEW3127. To confi rm
the clock time, use the PC application KEW Windows or repeat the following
steps.
(1) Hold down the ESC button and power
on the instrument.
(2) At the lower left on the LCD, Y
starts blinking. Adjust the year with the
UP/DOWN button ( ), and then
press the ENTER button ( ).
(3) ThenM:Dstarts blinking. Adjust
the month with the UP/DOWN button
( ), and then press the ENTER
button ( ). Likewise, adjust day with
the UP/DOWN button ( ), and
then press the ENTER button ( ).
(4) The last parameter,h:mstarts
blinking. Adjust hour with the UP/
DOWN button ( ), and then
press the ENTER button ( ).
Do the same to set minute and press
the ENTER button ( ).
(5) Now clock setting completes.
Power off the instrument.
[Power-off state]
+ Power on
Blink
Blink
Month
Day
Blink
Hour
Minute
1. Adjust year.
2. Adjust Month & day.
3. Adjust Hour &Minute.
4. Clock setting
is finished.
To Next Page
Loading...
Need help?
General
