2. Click 'Device Manager'.
・
Device Manager window is displayed.
3. Double-click 'Port' and confirm that 'ICS ADAPTER (COM 'X")' is displayed.
・
X' indicates the number that the software will use. Write it down as it will need to be referred to later.
These instructions use the number 3 as an example for 'X', but your computer or USB port may assign
a different number. Make sure to check the port number used on your computer.
・
If the ICS USB Adapter is not installed correctly, it will not be displayed. In this case, repeat the 'ICS
USB Adapter connection and driver installation’ .
5
To Next Page
Loading...
Need help?
General