INTRODUCTION
Inspired by the LR Baggs Handcrafted Video Sessions
and our experience in some of Nashville’s great
studios,
the Align Session brings our signature studio
sound to your live rig. Session circuitry enhances your
acoustic pickup and imparts the rich sonic character
that you’d expect from an experienced audio engineer
using some of the world’s nest studio gear. We’ve
captured this studio magic and put it into a compact,
easy-to-use acoustic pedal that will transform your
live sound.
GETTING STARTED
1. Power the Session with a 9V power supply or a 9V
battery.
2. Plug your guitar into the ¼” input to activate the
Session (upper right hand side) and a cable into the
¼” output (upper left hand side).
3. Adjust the gain control using the clip light. Read
section A in this manual for setting your gain to the
appropriate level.
4. Plug the ¼” cable into your amp, PA, or next pedal
in
the signal chain and experiment with the Session.
To Next Page
Loading...
Need help?
General
