La Crosse Technology BBB81380 - Turn Off Sounding Alarm; Activate and Deactivate Alarm; Snooze Function; MIN;MAX Memory Readings

La Crosse Technology, Ltd. www.lacrossetechnology.com/support Page 4
o
1-1 = one day alarm.
5. Alarm 2 settings (follow steps 1-4)
Turn off Sounding Alarm for 1 Day
•
When alarm 1 or 2 is sounding, the alarm icon A1 or A2 flashes.
•
Press the AL 1.2 button once to stop the alarm and reset it to come on the following day.
•
The A1 and/or A2 icon will remain on, indicating it is still active for the next time set to
alarm.
Activate | Deactivate Alarm
1. Press the AL1.2 button once to activate Alarm 1. A1 will appear.
2. Press the AL1.2 button a second time to activate Alarm 2. A2 will appear.
3. Press the AL1.2 button a third time to activate both Alarm 1 and 2. Both A1 and A2 will appear.
4. Press the AL1.2 button a fourth time to deactivate both alarms. Both the A1 and A2 icons will disappear.
Snooze
•
When an alarm sounds, press the button to silence the alarm for the 5 minutes or the snooze
duration selected in the settings menu. AL1 or AL2 will flash.
MIN/MAX Memory
Select MIN/MAX duration:
• • Hold the MEMORY/+ button to select MIN/MAX duration (24 / 48 / 72 or 96 hours). “24 Hr” and
will flash.
• Press and release the MEMORY/+ or DST/- buttons to select.
• Hold the MEMORY button to exit.
View MIN/MAX Temperature/Humidity Readings:
Press and release the MEMORY button to view:
maximum then minimum temperature/humidity readings for the duration selected.
USB Charging Port
Note:
This is a power-output charging port. It does not provide power to the alarm clock.
• Connect your external device’s USB charging cable (not included) to the USB charging port.
• Charging times will vary.
• USB Power Output: 1A maximum current.
• Charge 1A devices or devices that are self- regulating.