Pop-Up Projection
Alarm Clock
Model: 616-1950
DC:122817
Page | 2 Page | 3
POWER UP
1. Insert the 5.0 volt power cord into an outlet, then into your
clock. Optional: Install 2-AAA batteries into the bottom of your
clock.
• Hold the SET button to enter time set mode.
• Press the + or - button to adjust the values.
• Press the SET button to confirm adjustments and move to
the next item.
• Press the SNOOZE/LIGHT button at any time to exit.
Settings order:
Language: English | Spanish
Beep: ON | OFF
Hour
Minutes
Year
Month
Date
Fahrenheit | Celsius
Snooze Duration: 5 to 120 minutes
SETTINGS
BUTTONS
OTHER BUTTON FUNCTIONS
Set Alarm
• Hold for 2 seconds to enter alarm set mode
• Press +/- to adjust values and to confirm
• Press to activate or deactivate alarm.
Snooze:
• Press SNOOZE/LIGHT to snooze alarm for 10 minutes
Nap:
• Hold NAP for 2 seconds to set nap duration
• Press +/- to adjust values and NAP to confirm
• Press NAP at anytime to start nap countdown
Date Display (Weekday or Day/Month/Date):
• Press the MINUS button to select date display
Backlight Intensity:
• Press SNOOZE/LIGHT button to adjust 4 levels or O
Projection Intensity:
• Press to adjust 4 levels or OFF
Projection Rotate:
• Hold for 2 seconds to rotate projected
image in 90 degree increments
Note: Weekday adjusts
automatically when year,
month, and date are set.
To Next Page
Need help?
General
