POWER UP
Remove the Rain Sensor funnel and insert 2 “AA” batteries
into the Battery Compartment.
SPECIFICATIONS
• Rainfall Range: 0-393.6 in (0-9999mm)
• Transmission Range: 330 Feet (100 Meters)
433MHz open air
• Power Requirements: 2 “AA” batteries (included)
• Update Interval: Every 45 Seconds
• Sensor Dimensions: 7.16” L x 5.24” W x 5.04” H
(18.2 cm L x 13.3 cm W x 12.8 cm H)
Page | 2 Page | 3
• Mount the Rain Sensor horizontally and ensure it’s level.
• The sensor should be mounted more than 3 feet above
ground.
• Your Rain sensor needs to be in an open area for accurate
readings.
• Make sure the base of your Rain Sensor is not in a
depression.
• This Rain Sensor has drainage holes in the bottom to allow
it to self-empty.
• View sensor mounting video at:
bit.ly/Rain_SensorMounting
MOUNTING
RAIN READING ON WEATHER STATION
Please see your specific Weather Station manual for
instructions to read the Rain Sensor in the station itself.
Funnel
Battery
Compartment
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide
feedback on our social media outlets!
To Previous Page
Loading...
