Page | 4Wi-Fi Professional Station
THERMO-HYGRO
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
WIND SPEED
Ensure the sensor is mounted vertically an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
RAIN
Mount in an open area, preferably o the ground on a level platform.
• Clean out the bucket regularly to avoid debris; this can aect readings.
For detailed sensor setup and mounting instructions, see page 25.
Buttons located on top of Profesional Weather Station
Buttons located on the right side of Professional Weather Station
SET
Hold for basic setting. Press to view Wi-Fi status.
TEMP, WIND, RAIN
Press to view history.
LIGHT
Press to adjust brightness. Hold to set Auto Dim.
+ or –
Use + or – to adjust values in settings.
+ & –
Hold both buttons to search for Wi-Fi.
SENSOR
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold MINUS (–) to
remove.
DAILY, HOURLY
Press to see forecast. Must be connected to Wi-Fi.
RAIN & LIGHT
Hold both buttons together to reset all sensor ID’s and Wi-Fi settings.
EXTRA SENSOR
Press to toggle through “extra sensor” & Barometric Pressure. Hold to add Sensors.
QUICK MOUNTING TIPS
BUTTON FUNCTIONS
To Next Page
Loading...
Need help?
General
