Need help?Do you have a question about the La Crosse Technology WS-7394U-IT and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Forecast Icons | Yes |
| Wireless Frequency | 915 MHz |
| Outdoor Temperature Range | -40°F to 140°F (–40°C to 60°C) |
| Indoor Temperature Range | 0°C to 50°C (32°F to 122°F) |
| Wireless Range | 330 ft (100 meters) in open air |
| Power Source (Sensor) | 2 x AA batteries |
| Temperature Resolution | 0.2° F |
| Humidity Range | 1% to 99% RH |
Details the process of installing batteries in both the remote sensor and the weather station for initial setup.
Describes the immediate actions after battery installation and initial display.
Explains how the weather station receives and sets the time from the WWVB radio signal.
Outlines the sequence of functions available for programming the weather station settings.
Guides the user through adjusting the brightness and contrast of the LCD display.
Instructions for setting the correct time zone for accurate time display.
Details how to enable or disable Daylight Saving Time for the station.
Explains how to turn the automatic radio-controlled time synchronization on or off.
Allows selection between 12-hour (AM/PM) and 24-hour time display formats.
Procedure for manually setting the current hour on the weather station.
Procedure for manually setting the current minutes on the weather station.
Procedure for manually setting the current year on the weather station.
Procedure for manually setting the current month on the weather station.
Procedure for manually setting the current date on the weather station.
Allows selection between Fahrenheit (°F) and Celsius (°C) for temperature readings.
Allows selection between inches of mercury (inHg) and hectopascals (hPa) for pressure.
Guides the user in setting the relative barometric pressure value for accurate forecasts.
Adjusts the sensitivity of the weather forecast icon based on pressure changes.
Details how to view and reset the recorded minimum and maximum indoor temperature and humidity.
Details how to view and reset the recorded minimum and maximum outdoor temperature.
Instructions for setting up and connecting additional remote temperature sensors to the station.
Explains how to switch between and manage readings from multiple connected remote sensors.
Describes the comfort level indicator based on indoor temperature and humidity.
Explains the weather forecast icons and how they relate to pressure trends.
Explains the meaning of the arrows indicating air pressure changes and weather trends.
Details how the barometric air pressure is displayed and calibrated by the user.
Explains the bar chart representing air pressure trends over the last 12 hours.
Provides methods and steps for securely mounting the remote temperature sensor.
Instructions for mounting the main indoor weather station using its stand or wall mount.
To Next Page