Holder
OUTDOOR TEMPERATURE TRANSMITTER:
WS-8157
OMIC CLOCK WITH OUTDOOR WIRELESS TEMPERA
AT TURE
AND WEATHER FORECAST
Instruction Manual
FEATURES:
ATOMIC CLOCK:
• Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals
• Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the
steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery compartment
and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
• WWVB Radio controlled time with manual time setting
DO NOT SET THE CLOCK.
• 12/24 hour time display
• Time display: hour, minute, second
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
Function keys
LCD1
display
Foldable stand
Battery cover
Hanging holes
LCD2
display
• Alarm setting with snooze function
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the
steps below:
• Calendar display
• Weekday display (4 languages to choose from: English, French, Spanish and German)
1. Remove the cover.
2. Insert the batteries, observing the correct polarity (see marking inside battery compartment).
• Time zone setting
3. Replace the battery cover on the unit.
• Daylight savings time ON/OFF option (DST)
Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.
• ºC or ºF temperature display selectable
• Indoor temperature display
• Outdoor temperature display via 433MHz transmission
• Wall mount or freestanding
• Weather forecast for next 12 to 20 hours based on changing air pressure
To Next Page
General
