To Next PageTo Next Page
Need help?Do you have a question about the La Crosse Technology WS-9025U and is the answer not in the manual?
Temperature Measurement| indoor temperature range | +14.2°F to +139.8°F |
|---|---|
| outdoor temperature range | -21.8°F to +157.8°F |
| temperature resolution | 0.1°F |
Humidity Measurement| indoor and outdoor humidity range | 1% to 99% |
|---|---|
| humidity resolution | 1% |
| indoor humidity checking interval | every 20 seconds |
Power| weather projection station power supply | 3 x AA, IEC LR6, 1.5V |
|---|---|
| thermo-hygro transmitter power supply | 2 x AA, IEC LR6, 1.5V |
| battery life cycle | approximately 12 months |
Dimensions| weather projection station dimensions | 3.97” x 2.48” x 7.16” |
|---|---|
| thermo-hygro transmitter dimensions | 2.36” x 2.87” x 4.76” |
| weather projection station dimensions in mm | 101 x 63 x 182mm |
Steps for installing or replacing batteries in the main weather station unit.
Steps for installing or replacing batteries in the outdoor temperature and humidity sensor.
Procedures for powering up and configuring the station after battery installation.
Instructions for connecting the power adapter for continuous operation of the projector.
Details conditions and steps required for resetting the station and sensor.
Instructions on aiming the projector and selecting display modes.
Details operations for settings like contrast, time zone, DST, and reception.
How to adjust the screen contrast level for better readability.
How to select the correct time zone for accurate time display.
Steps to set and activate Alarm 1 or Alarm 2.
How to use the snooze function and stop ringing alarms.
Explains the various icons used for predicting weather conditions.
Explains indicators for air pressure changes and expected weather trends.
Displays and explains indoor temperature and relative humidity data.
Displays and explains outdoor temperature and relative humidity data.
