How to fix incorrect hour on La Crosse Technology WT-5120 433?
If the hour is incorrect on your La Crosse Technology Clock, but the minute is correct, ensure that you have selected the correct time zone and daylight saving time settings.
What to do if LCD is faint on La Crosse Technology Clock?
If the LCD screen on your La Crosse Technology Clock is faint, replace the batteries.
Why is my La Crosse Technology WT-5120 433 not receiving WWVB signal?
There might be several reasons why your La Crosse Technology Clock isn't receiving the WWVB signal. Try these steps: 1. Face the front of the projection alarm towards Ft. Collins, Colorado, to improve reception. 2. Wait overnight for the signal to connect. 3. Ensure the clock is at least 6 feet away from electronic devices like TVs or computers. 4. Remove the batteries for five minutes, reinsert them, and leave the unit alone overnight without pressing any buttons.
What to do if “--.-” appears in outdoor temperature LCD of La Crosse Technology WT-5120 433?
If you see “--.-” on the outdoor temperature display of your La Crosse Technology Clock, try the following: 1. First, check the batteries in the remote unit. 2. If you've replaced the batteries, remove all batteries from the main unit and the remote, then follow the start-up procedure again.
Why does “OFL” appear in the outdoor temperature LCD on my La Crosse Technology WT-5120 433 Clock?
If “OFL” is displayed on the outdoor temperature LCD of your La Crosse Technology Clock, it could be due to a few reasons: 1. The remote temperature may be out of the device's measuring range. 2. Check the batteries in the remote unit. 3. There might be interference from external sources like cordless phones.
Why does “OFL” appear in the indoor temperature LCD on my La Crosse Technology WT-5120 433?
If “OFL” appears on the indoor temperature display of your La Crosse Technology Clock, it means: 1. The unit should be moved to a location where the surrounding temperature is warmer or cooler. 2. The current surrounding temperatures are outside of the clock's measuring range.
Why is the projection faint on my La Crosse Technology Clock?
If the projection on your La Crosse Technology Clock is faint: 1. Use the AC adapter for power. 2. Darken the surrounding environment. 3. If not using the AC adapter, try using fresh batteries.
General| Brand | La Crosse Technology |
|---|---|
| Model | WT-5120 433 |
| Category | Clock |
| Language | English |
Lists optional batteries needed for the alarm clock and sensor.
Lists the main features of the projection alarm device.
Instructions for installing batteries in the remote sensor unit.
Instructions for installing batteries or AC adapter for the main unit.
Outlines the order for setting up the alarm functions.
Identifies and describes the function of each button on the alarm unit.
Step-by-step guide to manually set the current time on the alarm.
Instructions for selecting the correct time zone for accurate time display.
Guide to enable or disable automatic Daylight Saving Time adjustments.
Lists the primary functions and capabilities of the projection alarm.
Explains how the clock receives and displays time via radio signal.
Details how the device projects time and temperature and its orientation.
Describes the night-viewing backlight function and its activation.
Explains how indoor temperature is measured and displayed by the internal sensor.
Details the measurement and display of indoor humidity using the internal sensor.
Instructions for setting up and placing the remote sensor for outdoor temperature.
Covers setting, activating, deactivating, and silencing the alarm.
How to toggle between indoor temp/humidity and alarm time displays.
Steps for attaching the sensor bracket using screws.
Instructions for mounting the sensor bracket using the included adhesive tape.
To Next Page