La Crosse Technology WT-8112-U - Using Non-Rechargeable Battery

18
To use a non-rechargeable alkaline battery:
1. Remove the included rechargeable AA battery from the
compartment.
2. Use the switch to select the alkaline battery (see below).
3. Insert 1 x AA, IEC LCR6, 1.5V Alkaline battery into the
compartment, observing the correct polarity (see marking
inside battery compartment.
4. Replace battery cover
DO NOT SET THE CLOCK.
Note: For best performance, batteries should be replaced at
least once every 2 years to maintain the best running accuracy.
Ensure that the batteries used are new and the correct size.
Please help in the preservation of the
environment and return used batteries to an
authorized depot.
Use switch to
select which type
of battery will be
used before
inserting the
battery into the
compartment
Battery
compartment
cover
Rechargeable Alkaline
battery switch position
Primary Alkaline battery
switch position