WT-8005U www.lacrossetechnology.com/support Page | 1
Model: WT-8005U
Instruction Manual
DC: 040815
Digital Atomic Wall Clock
Get Started
Step 1: Insert 2 fresh AA, LR6 1.5 volt Alkaline batteries into the atomic
clock according to the polarity markings.
Restart: If the indoor temperature is not displayed after 60 seconds,
remove batteries from the atomic clock. Press any button on the atomic
clock 20 times. After 15 minutes, return to Step 1 above.
Indoor Temperature,
Weekday, + Date
Battery Cover
2-AA batteries
To Next Page
Need help?
General
