10
a. If the hands do not stop at the 12:00 position, press and
release the RECESSED BUTTON one time. Press and
release the RECESSED BUTTON several times to advance
the big hand in small steps until the hands are set exactly to
the 12:00 position.
b. To exit this setting, press and release the PUSH-PIECE.
2. Press and release the PUSH-PIECE. The watch automatically
adjusts to the manually set time and attempts to receive the
WWVB signal. After successful WWVB signal reception, the
time will be set automatically.
SETTING TIME ZONE
You may select your time zone manually.
To Next Page
Loading...
