9
2. Place the watch on a steady surface for better reception. Prior
to WWVB reception (and 15 seconds after holding the PUSH-
PIECE) the hands will automatically return to the manually set
time. The watch is now set to the WWVB signal reception mode.
If the reception is disturbed (ex: close proximity to metallic
objects or electric appliances), the watch will automatically try
several times to receive the WWVB signal.
ADJUSTING THE HANDS
If the time is displayed incorrectly despite successful WWVB signal
reception, the hands may have been moved by mechanical
influences and will need to be adjusted manually.
1. Press and hold the PUSH-PIECE for about 4 seconds. The
hands will move towards the 12:00 position.
To Next Page
Loading...
Need help?
General
