What to do if La Marzocco GS/3 shows Flowmeter Alarm?
If you're encountering a flowmeter alarm on your La Marzocco Coffee Maker, it indicates that water isn't flowing through the flow meter. To resolve this, it is necessary to call a service technician to fix this problem.
What to do if La Marzocco GS/3 displays Filling-up T-out Alarm?
If your La Marzocco Coffee Maker displays a Filling-up T-out Alarm, you should call an authorized service technician to repair this fault.
How to fix T.Probe Unconnect Boiler temp. on La Marzocco GS/3?
To reset the 'T.Probe Unconnect Boiler temp.' error on your La Marzocco Coffee Maker, the only way is to repair the Safety Probe to restore the signal to the CPU.
How to fix Corrupted Data error on La Marzocco GS/3?
If you see a 'Corrupted Data' error on your La Marzocco Coffee Maker, turn the machine off using the main switch. This action should clear the error.
General| Type | Espresso Machine |
|---|---|
| Manufacturer | La Marzocco |
| Model | GS/3 |
| Boiler Type | Dual Boiler |
| Steam Boiler Capacity | 3.5 liters |
| Brew Boiler Capacity | 1.5 liters |
| Boiler Material | Stainless Steel |
| Pump Type | Rotary Pump |
| Pressure Gauge | Yes |
| Temperature Control | PID |
| Pre-infusion | Yes |
| Material | Stainless Steel |
| PID Controller | Yes |
| Water Source | Water Tank |
| Voltage | 110V or 220V (depending on model) |
| Group Head | Saturated |
| Power | 1600W |
| Steam Wand | Yes |
Crucial safety guidelines for installation, operation, and usage.
Covers filling water, connecting power, and filling boilers.
Guides on setting the expansion valve for optimal coffee boiler pressure.
Instructions for setting the water pump pressure.
Lists and explains error/warning messages and their remedies.
To Next Page
