Laars newport NP 100 - User Manual

Installation, Operation and Maintenance Instructions Document 1100B
Installation,
Operation and
Maintenance
Instructions for
Newport
Oil Fired Boiler
FOR YOUR SAFETY: This product must be installed and serviced by a professional service technician,
qualified in boiler installation and maintenance. Improper installation and/or operation could create
carbon monoxide gas in flue gases which could cause serious injury, property damage, or death.
Improper installation and/or operation will void the warranty.
WARNING
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or loss of life.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
Installation and service must be performed by a qualified installer, service agency, or fuel oil
supplier.
52-206B
A subsidiary of BRADFORD WHITE Corporation

Summary

General Information

Boiler Installation and Location

Guidelines for boiler installation, placement near chimney, and clearances to combustibles.

Combustion, Ventilation, and Chimney Requirements

Specifications for adequate air supply for combustion and proper chimney draft for safe operation.

Boiler Components and Oil System

Details on boiler controls, domestic water coil, oil burner installation, and fuel line setup.

Oil Storage and Fuel Line

Information on acceptable fuel storage methods and recommended fuel line piping systems.

Boiler Operation and Maintenance

Boiler Operation and Controls

Explains boiler operation via aquastat relay, thermostat, and high/low limit switches.

Domestic Water and Heating Systems

Details domestic water piping connections, anti-scald valve, and heating system water circulation.

Boiler and Chimney Cleaning

Annual procedures for cleaning the boiler internals and chimney to ensure efficiency and safety.

Burner and Coil Servicing

Burner Servicing Guidelines

Emphasizes professional servicing for the oil burner according to manufacturer instructions.

Tankless Coil Maintenance

Addresses mineral deposits in the tankless coil and methods for cleaning or replacement.

Technical Specifications and Part Numbers

Boiler Dimensions and Specifications

Provides detailed dimensions, firing rates, efficiency, and shipping weight for various boiler models.

Burner Specifications

Lists burner model, nozzle, manufacturer, static plate, head type, and pump pressure details.

Replacement Part Numbers

Catalog of part numbers for boiler body, panels, flue cover, chamber, and base assembly.

Laars newport NP 100 Specifications