Lab12 suono- 25W Class A Single Ended Power Amplifier
Page 9 of 9
For the safety of your equipment
! Make sure that all your equipment is turned off before any connection.
! To avoid damaging your speakers you have to turn on suono some seconds after
turning on your preamplifier and turn it off some seconds before turning off your
preamplifier.
! Never turn on suono without connected speakers or preamplifier on it. It is
possible to damage tubes or even output transformers.
Specifications
• Power: 230VAC 50Hz (115VAC 60Hz)
• Power consumption: 350 VA max
• Output power: 25 Watt per channel (KT 150)
• Frequency response: 20 Hz-25 KHz (-0.9dB)
• Input impedance: 100K ohm
• Recommended speakers: 4-8 ohm
• Tube complement: 2x 6n2p dual triodes, 2x KT-150 Power Pentodes
• Input sensitivity: 600mV triode mode / 500mV Ultra Linear mode
• Inputs: 1x line stereo (RCA connectors)
• Available Colours: Matt Black
• Dimensions (WxHxD): 43x19x29 cm
• Weight: 18Kg
Warranty
This device has 5 years warranty for all parts (or 90-Day Limited Warranty for vacuum tubes) from the
day of purchase.
To Previous Page
Loading...