EasyManua.ls Logo

Lab-T X12 - Page 5

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caution
* Do not put sharp, hard materials into the connector hole when using this product.
* Do not put apart or repair X12 yourself.
* Do not leave X12 in a vehicle in hot or cold weather.
* Leaving X12 in a closed area for a long period of time may result in deformation or
malfunction of this product.
* For charging use only the provided charger & cable. Using a third party charger may
cause explosion, fire or malfunction.
* Stop using X12 immediately if you smell something like smoke from this.
* Stop using X12 immediately when exposed to risk of fire and call the customer center
and consult if you can use X12 at the environment.
* Please do not use third party’s components.
* If you use a third party component, it could cause breakdown or malfunction.
* Be careful not to apply strong pressure on this product, which may cause breakdown
or damage to the product.
* If dirt slips in, the quality could decline, so make sure to clean the product
with soft cloth often.
* If X12 submerges under water, don’t put apart or repair it yourself. Please turn
the power off and call our customer service center.
Certification :
-03-
Identification Code : Shown below
Company Name:
Manufacturer/Country:
Date of manufacturing: Marked
Separately
Model Name: Shown Below
Input Rating: Shown Below
Date of Manufacture: Separately
Shown
Model Name Input
Rating
Identification Code