Micro SD Card
18
You can purchase a Micro SD card to transfer fridge and temperature data from the controller
to your computer. The card is supplied with an adapter for convenience so you can use a
regular SD card reader slot if required.
You cannot use any Micro SD card with your Labcold IntelliCold® pharmacy refrigerator.
Only the Micro SD cards from Labcold are encoded to work with the controllers. They are
fridge specific, so one Micro SD card cannot be used for a number of IntelliCold® fridges, you
need one for every refrigerator that you want to use this function on.
The controller automatically records data every minute about alarms and fridge function and
allows you to download this information as a CSV le. The controller will store this information
for 18 months but we recommend that you download the data once a week, especially as the
more data there is to download, the longer it takes.
Downloading Data to the Micro SD card
To download the data, you rst have to fully insert the Micro SD card, printed side up in
the Micro SD slot on the bottom of the controller.
When you insert the card the Sd screen will be displayed. Touch the tick icon/button to
select options for which data you want to download.
You will have the option to download a number of days of data, all the data since the last
download or all the data currently stored on the controller. Use the arrow icons/buttons to
select the option you want.
The option to download data from where the last download ended is only available if
there has previously been at least one download.
To Next Page
Loading...
Need help?
General
