LaboGene Mars Pro User Manual

Edition 3 April 2012 Mars/Mars Pro Service Manual
Page 10/59
2.2 List of tools required
For routine service testing, we recommend instruments in accordance with the requirements of EN 12469:2000 for the
testing of airflows / filters and containment testing.
For repair servicing the following tools may be required:
Socket wrench set
6 – 32mm
Slot-head screwdriver set
2 – 6mm
Phillips screwdriver set
preferably magnetic
Open-ended wrench set
6 – 32mm
Allen Key set
1.5 – 6mm
Multimeter
U / I / Ohm
Diagonal cutter
small
Wire stripper
Flat connector pliers
Needle nose pliers
small
Tweezers
Starter punch
small
Spirit Level
small
Heat Gun
Soldering Iron
Solder
Cable ties
small , black
Shrink tube
6mm diameter
Shrink tube with sealant
6mm diameter
Flat connectors
6.3 mm
Wire end ferrules
1mm²

LaboGene Mars Pro Specifications

General

Brand	LaboGene
Model	Mars Pro
Category	Laboratory Equipment
Language	English