To Next PageTo Next Page
Need help?Do you have a question about the LaboGene SCANLAF Mars GS Series and is the answer not in the manual?
General| Model | SCANLAF Mars GS Series |
|---|---|
| HEPA Filter Class | H14 |
| Lighting | LED |
| Certification | EN 12469 |
| Airflow Distribution | 70% recirculated, 30% exhausted |
| Filter Type | HEPA |
| Noise Level | < 65 dB |
| Power Supply | 230V, 50/60 Hz |
| Material | Stainless Steel |
Guidance for safe servicing and repair procedures, emphasizing qualifications and understanding the manual.
Lists standards and directives the cabinet complies with and has been tested against.
Details the warranty conditions, including authorized modifications, spare parts, and service checks.
Details the materials used for different cabinet components and their treatments.
Guidelines for moving the cabinet, including door clearance and handling.
Site preparation requirements, leveling, and initial checks after installation.
Information on electrical connection requirements, fusing, and safety precautions.
Procedure for measuring and accepting laminar airflow velocity and distribution.
Method for measuring and accepting air velocity at the inlet and exhaust.
Technique for visualizing airflow patterns using smoke to ensure containment.
Procedure for testing HEPA filter integrity using aerosol and photometer.
Optional test for operator protection using a KI Discus tester.
Pre-operational checks and preparation, including environmental conditions and cleaning.
Guidelines for safe operation within the cabinet, emphasizing movements and airflow.
Post-operational procedures, including cleaning, disinfection, and closing the window.
Details programming functions, primarily for trained personnel and service modes.
Explains the supervision system, safe/unsafe condition indicators, and alarm triggers.
Describes the three alternative settings for the cabinet light behavior, especially during alarms.
Routine weekly cleaning of the cabinet exterior and front window.
Conditions for reliable function and compliance, including air velocities and filter efficiency.
Guidelines and procedures for decontaminating the cabinet using formaldehyde.
Information on HEPA filter handling, replacement, and disposal.
Step-by-step instructions for replacing main and exhaust HEPA filters.
List of approved main, exhaust, and pre-filters from Camfil.
Location and specifications of fuses for various cabinet components.
Details on replacing fluorescent and UV germicidal lamps.
Catalog numbers and descriptions for various spare parts, including lamps, filters, and boards.
