Need help?Do you have a question about the LaboGene ScanSpeed 1248 and is the answer not in the manual?
General| Brand | LaboGene |
|---|---|
| Model | ScanSpeed 1248 |
| Category | Laboratory Equipment |
| Language | English |
Explains symbols used on the device and in the document for warnings and reminders.
Lists essential safety guidelines for operating the centrifuge and handling samples to prevent injury or damage.
Provides an overview and diagram of the ScanSpeed 1248 centrifuge, detailing its main components.
Details the performance, dimensions, power requirements, and key features of the ScanSpeed 1248 centrifuge.
Instructions for powering the instrument on/off and safely releasing the centrifuge door.
Steps for correctly attaching and detaching rotors, including swing-out and fixed angle types.
Guidelines for properly loading sample tubes into the rotor for balanced operation and safety.
Explains the purpose and usage of each button and display element on the centrifuge's control panel.
Detailed steps for setting the rotational speed (RPM) and relative centrifugal force (RCF) for centrifugation.
Instructions on how to set the centrifugation duration, including minute and second increments.
How to adjust acceleration and deceleration rates for protecting sensitive samples during runs.
Guide on how to save custom settings and recall previously stored programs for repeat runs.
Describes the function of the 'Pulse' button for quick, short spins.
Instructions on how to start and stop the centrifugation process using the control panel.
Procedure for manually opening the centrifuge door in case of power failure or other emergencies.
Steps for safely replacing the fuse if the instrument does not power on.
Cleaning instructions for the external surfaces of the centrifuge.
Guidance on cleaning and keeping the internal chamber dry after use.
Recommendations for cleaning the motor shaft to prevent imbalance issues.
Advice on cleaning rotors, avoiding scratches, and proper storage.
Precautions to take when moving or shipping the centrifuge to protect internal components.
A list of common symptoms and their potential causes and checks to resolve issues.
Explanation of error codes displayed by the instrument and recommended actions for each.
To Next Page
