LaboGene ScanSpeed 1248 User Manual

07052013RS01
Cat. No. 9.900.900.758
CopyRight © 2013
Page 13 of 20
4. Operation
4-1. Key Functions of Control Panel
□ RPM/RCF
For automatic conversion of RPM/RCF and to set the speed
□ TIME
Use to set time, available range up to 99 min. 59 sec. (00:00: continuous)
□ Temp
Use to set temperature (-20°C ~ 40°C)
□ ACC/DEC
Use to set the acceleration & deceleration level from 1 to 9 steps. ‘0’ in deceleration step
means natural deceleration. Larger number means faster acceleration or deceleration.
□ PROG
Use to save a set of setting values or recall the saved program number
□ Fast Cool
Use to reach rapid refrigeration up to the setting temperature.
□ Pulse
□ Rotor
Use for quick runs
g-value confirmation for using tube adaptors
□ Enter
Use for completion of data setting
□ Start/Stop
Use to start and stop operation
□ Door
Use to open instrument lid

LaboGene ScanSpeed 1248 Specifications

General

Brand	LaboGene
Model	ScanSpeed 1248
Category	Laboratory Equipment
Language	English