How to fix LaCie Ethernet Disk Network Hardware not seen by LaCie Network Assistant?
If the LaCie Network Assistant does not detect your LaCie Ethernet Disk, refresh the list and wait. If the issue persists, your network might be blocking UDP broadcasts. Connect the LaCie Ethernet Disk directly to the same hub as your workstation. If that doesn't work, use a crossed Ethernet cable to connect the LaCie Ethernet Disk to your workstation.
How to find IP address of LaCie Ethernet Disk Network Hardware in DHCP?
To find the IP address of your LaCie Ethernet Disk in DHCP, use the LaCie Network Assistant. The right panel displays network information, including IP addresses, for all LaCie NAS servers. Alternatively, in Windows, open a command prompt and type “ping [nas_name]” to see the LaCie Ethernet Disk’s IP address.
What to do if LaCie Ethernet Disk Network Hardware shows error messages when attempting to transfer data?
If you encounter error messages when transferring data, especially with Mac OS 9.x, ensure all file and folder names are less than 27 characters. This limitation also applies in mixed Mac OS 9.x and 10.x environments. If using Mac OS 10.x and sharing files with Windows, avoid using these characters in names: ? [ ] \ / = + < > ; : “ , | *
Why does Windows report inaccurate free space on LaCie Ethernet Disk?
Windows might report inaccurate free space because some Windows clients can't recognize disk space exceeding 2GB. Note that this only affects the display; the actual available free space is unaffected.
What to do if LaCie Ethernet Disk can not be formatted or defragmented?
To format or defragment the LaCie Ethernet Disk, reboot the device and perform these system-intensive operations immediately afterward. This is recommended because some files may be locked during other operations.
General| Brand | LaCie |
|---|---|
| Model | Ethernet Disk |
| Category | Network Hardware |
| Language | English |
To Next Page
