To Next Page
B
Becky FisherAug 17, 2025
How to fix LaCie Wireless Space Network Hardware not appearing in Network Assistant?
- KKimberly CombsAug 18, 2025
Quit LaCie Network Assistant and then restart it.
How to fix LaCie Wireless Space Network Hardware not appearing in Network Assistant?
Quit LaCie Network Assistant and then restart it.
Why can't I connect to the LaCie Wireless Space Network Hardware Dashboard?
If LaCie Network Assistant detects the Wireless Space but you can't access the Dashboard, the issue might stem from your network settings. If you've set up your network with a static IP, ensure that the IP addresses for the Wireless Space fall within the same range (e.g., between 192.168.1.1 and 192.168.1.250). Also, verify that you're not using any proxies to access the Internet, as proxy settings can sometimes interfere with Dashboard connectivity.
How to make media files visible on UPnP AV media player for LaCie Network Hardware?
If media files on your LaCie Wireless Space aren't showing up on your UPnP AV media player, first, check the Dashboard's General Settings to ensure that the Media Servers option is enabled. Also, note that UPnP AV devices can only detect media files stored in OpenShare. Files in MyShare won't be accessible to these devices.
Why is there a delay in accessing shares on LaCie Wireless Space?
Access to a share can become slow when multiple file transfers occur simultaneously.
What to do if port forwarding no longer works on LaCie Wireless Space?
If you can no longer use port forwarding, go to the Dashboard Firewall page to check if the port forwarding rule is still valid. If it is not, re-enter the information. If you've added a new rule, make sure it doesn't conflict with any previous port forwarding rules. Try disabling UPnP IGD and NAT-PMP. Define a DHCP static lease rule for your target device in the Dashboard Network LAN page>DHCP static lease.
How to fix 'cannot map MyShare' on LaCie Wireless Space Network Hardware?
If you can't map MyShare, mapping OpenShare first might be the reason due to the login requirement. To fix this: 1. Unmap OpenShare in an Explorer window. 2. Map MyShare. 3. Finally, map OpenShare.
What to do if LaCie Wireless Space doesn't recognize USB drive?
If a USB drive/key isn't recognized, ensure both ends of the USB cable are properly inserted into the ports on both the Wireless Space and the device. Try disconnecting and reconnecting the cables after 10 seconds. If it's still not recognized, restart the Wireless Space. If the issue continues, try a different USB cable and/or USB expansion port on the Wireless Space and/or the device.
Why are there two drive icons for LaCie Wireless Space in Shared?
The icon marked 'Time Machine' is a virtual representation for a Time Machine compatible disk and is not a volume for use on the desktop. You can use MyShare, OpenShare, and USB volumes connected to the Wireless Space on the desktop. You can also choose MyShare or OpenShare for Time Machine backups.
Why is my USB printer not recognized by LaCie Network Hardware?
The Wireless Space does not support Printer Sharing.
What to do if files cannot be copied to LaCie Wireless Space USB volume?
Please check the file format of your volume. This is a common problem with volumes formatted in Mac HFS+ Journaled. If the problem persists, reformat the drive, but make sure to copy all data before formatting any hard drive.
General| Storage Capacity | 1TB, 2TB |
|---|---|
| Power Supply | AC Adapter |
| Security | WPA/WPA2 |
| Compatible Devices | Windows, Mac, iOS, Android |
| Connectivity | Wi-Fi, Ethernet |
| Ports | Ethernet |
| Wireless Speed | Up to 300 Mbps |
| Network Protocols | 802.11n, 802.11g, 802.11b |
| Battery Life | Not applicable (requires external power) |
