To exit power-saving mode, review the table below:
Entering power-saving mode Exiting power-saving mode
The host computer placed the product into power-
saving mode due to inactivity.
Access the Rugged RAID Pro’s volume on the host
computer. For example, copy files to its volume.
The computer is in sleep mode. Wake up the computer.
Note on ejecting the volume and power-saving mode—Rugged RAID Pro enters power-saving
mode when its volumes are ejected and the device remains connected to the computer. To
access Rugged RAID Pro’s volumes, unplug the interface cable from the computer and reconnect
it.
To Next Page
Loading...
