Compass Mode
Hold [M]
[M]
[M]
[M]
[M]
Barometer Mode
Current Temperature display
Storm Alert
Sea Pressure
Calibration
Air Pressure
Calibration
Factory Default
Barometer Setting Sequence
Increase/
Decrease
the number
Increase/Decrease
the number at a
higher speed
Hold [S/S] / [L/R]
[S/S] / [L/R]
Barometer setting
- In Barometer mode, press and hold [M] to enter
setting mode. Press [M] to select among the
settings.
- When Storm alert is ON, 30 second beep alert
will be given and “ ” will shown in Current
and World time mode when the watch predicts
the upcoming weather is stormy.
- Before calibrate the sea level pressure, consult
the nearest observatory to get the sea and air
pressure of your current position.
Important: Storm alert is triggered when pressure
drops quickly with a certain period of time. But
sometimes, a very fast pressure changes maybe
due to altitude changes. This pressure changes
due to altitude variation may result in exactly the
same pattern as storm altert false alarm may
occur.
Note:
- Input an incorrect pressure during the
adjustment procedure may results an incorrect
pressure reading in the future.
7.1 Barometer Mode- Setting
8.0 Compass Mode - Tips and Precautions
8.1 Compass Mode - Compass Directions and Bearings
8.2 Compass Mode - Compass Display
Navigation
Direction
Magnetic North
Pole Pointer
Compass
Direction
Bearing
direction of
navigation
direction
Current time
Keep the Watch away from Magnetic sources,
like:
- Speakers,
- Motors,
- Mobile phones and etc.
Avoid measuring direction when:
- Close to a magnetic object
- Close to metallic object
- Close to an electrical appliance
- Inside a moving object.
Perform compass calibration or magnetic
declination compensation process when:
- The Watch is using for the first time,
- The battery has been replaced,
- The bearing direction digits are flashing, and
the compass bearing and compass
direction are flashing
- The compass uses in a location that is apart
from the place in which the compass had
been calibrated,
- The user intends to regulate the precision of
the digital compass.
NOTE:
- This Watch includes both compass directions and compass bearings.
object B
object B
object C
Compass Directions
Compass Bearings
object C
object D
object D
angular
difference
N
E
90°
SE
135°
NW
315°
point
A
point
A
0°
0°
N
Marks
N
NE
E
SE
SSE
SSW
WNW
NNW
Compass Directions Compass Bearing
North
349° - 11°
Northeast
East
Southeast
East Southeast
South Southwest
North Northwest
S
SW
W
NW
South
Southwest
West
Northwest
ESE
ENE
WSW
NNE
West Northwest
West Southwest
South Southeast
East Northeast
North Northeast
12° - 33°
34° - 56°
57° - 78°
102° - 123°
79° - 101°
124° - 146°
147° - 168°
169° - 191°
214° - 236°
192° - 213°
237° - 258°
259° - 281°
304° - 326°
282° - 303°
327° - 348°
NOTE:
- If NO key has been operated for about 1 minute, the Watch will go to IDLE Mode automatically. Press
[S/S] or [L/R] to resume the compass to normal operation .
- If distortion is detected, the compass bearing and compass direction are flashing. See 8.4 to restore
the compass to normal operation when distortion occurs.
Compass Mode Compass Idle
Distortion
Compass
bearing
Compass
direction
the north
pole pointer
NO key has been
operated for
1 minute
[S/S] or [L/R]
Current
Time
To Next Page
Loading...
Need help?
Sensor Specifications
Battery