12.0 Battery - Low Battery Indication
13.0 Specifications - Timekeeping Mode
13.1 Specifications - Sensor Mode
Timer Sounds:
- Last 10 minutes beep once every minute
- Last 1 minute beeps once every 10 seconds
- Last 5 seconds beeps once every second
- Sounds for 30 seconds when count to zero
World Time Mode
- Preset Time Zone: 59 cities
- Time Zone setting range (GMT): -13:00 ~
+13:00
Current Time Mode
- Hour, minute, second, am, pm, month, date
- Day of week, weather forecast, temperature, sea
level pressure history display or altitude history.
- Time System: 12-hour or 24-hour format
- Daylight Saving Time (DST)
Calendar System
- Auto-Calendar pre-programmed from the year
2000 to 2099
- Weather Forecast: 5 symbols to indicate the
predicated weather
Daily Alarm Mode
- 2 daily alarms
- Hourly chime
- Alarm Sound
- Sounds for 30 seconds at preset time
Countdown Timer Mode
- Resolution: 1 second resolution
- Measuring range: 99 hours 59 minutes 59
seconds
- Quick Set : 6 quick set Values (1, 3, 5, 10, 15, 45
minutes) and 1 User Define.
Barometer Mode
- Resolution/ Measuring Range: 300 hPa/mbar to
1100 hPa/mbar (8.85 inHg to 32.48 inHg)
- Sampling Interval : First 5 min: 1 second; After 5
min: 1 min
- History Recall: Maximum 24 hours history recall
Thermometer
- Resolution: 0.1 ˚C (0.1˚F)
- Measuring range: -10.0 ˚C to 60.0 ˚C (14.0 ˚F to
140.0 ˚F)
Compass Mode
- Resolution: 16 display (digital)
- Measuring range: 0˚ to 359˚ (digital)
- Others: Digital bearing reading Lock
- Digital backward bearing
- Declination Setting: Range: +90˚ to -90˚
Backlight
- Electro-Luminescent (EL) backlight
Battery
Watch: 3V lithium battery (CR2032) 1 piece
Trip Mode - Pedometer
- 3 Target Goal: Distance, Steps and Calories
- Step range: 0-99999
- Moving Timer: 0:00:00 to 9:59:59
- Distance Measurement: max. 99 km
- Speed Measurement: max. 65 km/h
- Maximum 30 Trip point data recall
- Maximum 10 Peak Points recall
Trip Mode - Altimeter
- Resolution : 1m (1ft)
- Measuring range: -706m to 9164m (-2316ft to
30067ft)
- Sampling Interval: First 5 min: 1 sec; After 5 min: 1
minute
Note:
Replace the battery with a new CR2032.
- However, if the appearance of battery-low indicator is caused by using the Watch under very cold
condition, the indicator will be disappeared when normal temperature returns.
- It is recommended to complete the battery replacement by a certified service agency, because this
Watch contains precise electronic sensors and components.
- The memory will be cleared if the battery has been replaced.
- See 8.4 to calibrate the compass before using the Compass again.
Instruction Manual
Sensor Master III
To Previous Page
Loading...
Need help?
Sensor Specifications
Battery