20-18071 Rev A
Maintaining Arm IM Pads &
Absorbent Sheets 1/2
The Arm IM Pad can be punctured numerous times before
being replaced or dried. It can withstand up to 5 x 2 ml
injections before needing replaced with a dry pad.
1. Partially unzip arm skin to wrist.
2. Remove the Arm IM Pad.
3. Wring out fluid from the pad.
4. Completely air dry (approximately 12 hours).
5. Lift out the IO Arm Bone
6. Remove Absorbent Sheet, if wet.
How-To Videos
To Next Page
Loading...
