20-18071 Rev A
Emptying Blood System
Once all sessions are complete, flush the Blood System with
distilled water, with the wounds connected. This will remove
remains of Laerdal blood in the Blood System, and prevent
clogging of valves and tubing.
The Blood System should be cleaned thoroughly once or twice
a month.
Emptying Internal Blood Tank
1. Connect an empty fill bottle to Blood Inlet.
2. Fluid from the internal tank will automatically drain into
the fill bottle.
3. When the flow stops, disconnect the blood connector.
Warning
Connecting a full Blood Unit to a Patient Simulator with an already
full internal tank will result in system overflow. Blood will drain out
of the right leg. Repeatedly overflowing the system may damage
the product.
How-To Videos
To Next Page
Loading...
