28
Care and Cleaning
General Care
• To maintain simulator skins, wash hands before use and place the simulator on a clean surface.
• Use gloves during simulation scenarios. Avoid using colored plastic gloves, as they may cause
discoloration of the simulator skin.
• If a training session involves the use of fluids in the Umbilical Reservoir and IO Leg, drain the fluid
immediately after the training session.
Skin
• Use a lint free cloth to remove dirt and dust.
• Clean skin with mild soap and water. Do not submerge.
• To remove birthing lubricant, use lukewarm soapy water.
Notes
These can discolor the manikin:
• Pigments from lipstick and pens
• Latex gloves
• Using clothes other than what is originally provided with the simulator.
To Next Page
Loading...
