5
System Overview & Setup
SimNewB can be controlled by the operator either by using a tablet or PC running Laerdal’s LLEAP
software, or using SimPad Plus which is Laerdal’s proprietary tablet.
Both LLEAP and SimPad Plus allow the operator to run sessions either by using pre-programmed
scenarios in Automatic Mode, or in Manual Mode.
Using either LLEAP or SimPad Plus allow vital signs to be displayed on a simulated Patient Monitor
(optional).
Both SimNewB and the Patient Monitor can be operated wirelessly.
Note
• Find SimPad PLUS User Guide on www.laerdal.com/support
• To access LLEAP help files, go to ‘Help’ on Laerdal Simulation Home
• For detailed connection instructions, download the ‘Wireless Setup Overview’ from www.laerdal.com/SimNewB
• To get the most out of your simulation training, download complimentary scenarios here: www.laerdal.com
SimPad PLUS Patient MonitorLLEAP
To Next Page
Loading...
Need help?
General
