23
9.7.1 Dismantling/Disposal
When discarding the LSU, we recommend it be dismantled and discarded according to local protocol.
Dismantle the LSU by unscrewing the screws on the back side of the LSU, remove the components and
sort according to the table in 9.7. The cleaned LSU can also be delivered to your local Laerdal Medical
representative for dismantling/disposal. Laerdal Medical AS will not charge any fee for the dismantling;
Sender is responsible for the cost of the shipment.
9.8 Symbols
Direct Current
Alternating Current
Class II Equipment, according to IEC 60601-1
Type BF applied part, according to IEC 60601-1
IP34 Protection class ref. IEC 529
This product is in compliance with the essential requirements of MDD 93/42/EEC as
amended by Council directive 2007/47/EC and Council directive 2011/65/EU relating to
restriction on the use of certain Hazardous Substances (RoHS 2)
Do not reuse
Date of production
Warning/Caution
Consult User Guide
The products is eligible to bear the CSA Mark with adjacent indicators ‘C’ and ‘US’ for
Canada and US
This appliance is marked according to the European directive 2012/19/EC on Waste
Electrical and Electronic Equipment (WEEE). The symbol on the product, or on the docu-
ments accompanying the product, indicates that this appliance may not be treated as house-
hold waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment
Caution: Federal law (USA) restricts this device to sale by or on the order of a physician
To Next Page
Loading...
