EasyManua.ls Logo

laerdal Suction Unit - Emissions Test Compliance; Immunity Test Compliance

laerdal Suction Unit
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Electromagnetic Emissions Tests
Emissions Test Standard or test method Compliance
RF emissions CISPR 11 Group 1 Class B
Harmonic emissions IEC 61000-3-2 Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3 Complies
Electromagnetic Immunity Tests
Immunity Test Standard or test method Compliance Level
Electrostatic discharge IEC 61000-4-2 ± 8 kV contact
± 2 kV, ± 4 kV, ± 8 kV, ± 15
kV air
Radiated RF EM fields IEC 61000-4-3 3 V/m
80 MHz – 2.7 GHz
80 % AM at 1 kHz
Proximity fields from RF
wireless communications
equipment
IEC 61000-4-3 380-390 MHz: 27 V/m
430-470 MHz: 28 V/m
704-787 MHz: 9 V/m
800-960 MHz: 28 V/m
1700-1990 MHz: 28 V/m
2400-2470 MHz: 28 V/m
5100-5800 MHz: 9 V/m
Rated power frequency
magnetic fields
IEC 61000-4-8 30 A/m
50 Hz or 60 Hz
Electrical fast transients /
bursts, AC power port
IEC 61000-4-4 ± 2 kV
100 kHz repetition frequency
Surges: Line-to-line,
AC power port
IEC 61000-4-5 ± 0.5 kV, ± 1 kV
Conducted disturbances
induced by RF fields, AC
power port
IEC 61000-4-6 3 V; 0.15 MHz – 80 MHz
6 V in ISM bands between 0.15
MHz and 80 MHz
80 % AM at 1 kHz
Voltage dips,
AC power port
IEC 61000-4-11 0 % UT; 0.5 cycle
At 0°, 45°, 90°, 135°, 180°,
225°, 270° and 315°
0 % UT; 1 cycle and 70 % UT;
25/30 cycles
Single phase: at 0°
Voltage interruptions,
AC power port
IEC 61000-4-11 0 % UT; 250/300 cycle
Electrical transient
conduction
along supply lines, DC
power port
ISO 7367-2 Test pulse severity level: III in
Table A2 of ISO 7637-2

Related product manuals