2
Table of Contents
Basic Operations-
How to “Turn On” Machine-
Establishing “Home” Position-
Basic Button Functions-
Changing Tools-Must have 90-95 PSI Air Pressure in System-
Changing Tools- Set Tool Cones.
Quick Start- Transfer “g”-Code Program.
Quick Start- Mounting Work Piece onto Tabletop.
QUICK START SECTION (Cont’d.)-Verify Coordinate System.
QUICK START SECTION (Cont’d.)-Verify which Tool Cone.
QUICK START SECTION (Cont’d.)- Set XY Origin Point.
QUICK START SECTION (Cont’d.)- Set the ”Z” Origin Point [Manually].
MULTIPLE TOOL PROGRAM
MULTIPLE TOOL PROGRAM –Setting Tool Offsets.
UNDERSTANDING WORK COORDINATE SYSTEMS-
TOOL CONE SETUP-
Maintenance & Troubleshooting-
PARTS & SERVICE-
Schematics-
Warranty-
Packaging/RMA Procedures-
Laguna Tools Packaging/Laguna Tools RMA Example-
Laguna Tools Packaging/Laguna Tools BILL of LADING Example-
To Next Page
Loading...