3
This document is intended to provide general information on how to operate the
Rich-Auto B57E Controller. Refer to the quick start section for accelerated start up.
INTRODUCTION
BASIC OPERATIONS
•3 Position Automatic Tool Changer
(ATC) Uses ISO-20 Tool Holders
•5 Position Automatic Tool Changer
(ATC) Uses ISO-20 Tool Holders
The Laguna IQ PRO WITH ATC can be ordered
with either a 3 ATC (3 Automatic Tool Changer
or a 5 ATC (5 Automatic Tool Changer).
To Next Page
Loading...