Operator's Manual – Lighthouse
© LAI GAMES
Page 20
P15 = LEVEL INDICATOR LEVEL at POWER ON
(Default rE) (Adjustable 1 – 5 & rE)
This adjustment allows the Level Indicator Level at Power On or a Reset to be
adjusted. It can be set to Level 1, Level 2, Level 3, Level 4, Level 5 or Remember
(rE) where the game remembers the level from the last game, previous to the
Power On or Reset.
P16 = ASTERISK OPTION
(Default 1) (Adjustable 1, 2, 3, 4 )
This adjustment allows the reward for stopping the needle on the Asterisk ( ) to
be adjusted. It can be set to:
1. Single extra credit
2. Extra single credit and the level indicator increments a level
3. Instant prize win
4. Single extra attempt (Try Again)
P17= NEEDLE ADJUSTMENT
(Default 0) (Adjustable 10 to -10)
This adjustment allows the position of the needle to be adjusted. This should be
kept at zero and the needle position adjusted manually with the Alignment Test
(See page 15 for more details) unless the needle is severely misaligned.
P18 = MERCY SYSTEM MODE ADJUSTMENT
(Default 0) (Adjustable 0 – 2)
This option adjusts the way that mercy tickets or capsules paid out if the optional
ticket or capsule dispenser is fitted. See P13 for setting the number of mercy
tickets or capsules that will be dispensed.
0. Mercy System disabled, no ticket or capsules will be paid. This setting
must be used if optional ticket or capsule dispenser is not fitted
1. Mercy tickets / capsules are paid if no Jackpot or Consolation prize is
won. Optional ticket / capsule dispenser must be fitted
2. Mercy tickets / capsules are paid on every game credit, regardless if
prizes are won or not. Optional ticket / capsule dispenser must be fitted
P19=GAME RESET TIME OPTIONS
(Default 1) (Adjustable 1, 2)
This variable sets the game reset time options. This controls how the level
indicator behaves once the Game Reset Time (P14) has been reached. If P14 is
set to INF (Infinite) then this setting is not used. It can be set to:
1. The Level Indicator will reset to the level set on P15, Power On Reset
Level Indicator Level.
2. The Level Indicator will reset to level 1.
* NOTE! *
In nearly all cases, P 17 should be set to its default value of 0. Only alter
this setting in cases of extreme misalignment! Please attempt mechanical
alignment first before altering this setting. See the Alignment Test mode
page 15 for more details on the manual alignment.
To Next Page
Loading...
Need help?
General