LAI Games Stacker Giant User Manual

Operator's Manual – Stacker Giant – SKILL
© LAI GAMES
Page 9
FITTING PRIZES TO THE PRIZE ARM
STEP ONE: Removal of Prize Locking Pin.
STEP TWO: Attachment of Hanging Ties.
STEP THREE: Loading of Prizes.
STEP FOUR: Correct positioning of prizes.
1. Unscrew the Prize Locking pin
(left-hand thread), by turning it
in a clockwise direction.
2. Remove the pin by pulling it all
the way out.
 Attach the prizes securely to the
Hanging Ties.
* NOTE! *
Be sure to allow a loose, 4-finger gap in
the ‘hanging tie’ to ensure that the
‘hanging tie’ does not interfere with the
operation of the Prize Arm mechanism.
 Load the prize arm by sliding the
Hanging Tie over the entire arm, as
shown making sure that the prizes are
facing towards the customer.
* NOTE! *
Stacker Giant is shipped from the
factory with the Locking Pins in the
Cashbox.
1
2
Allow a loose,
4-finger gap in
the hanging tie.

LAI Games Stacker Giant Specifications

General

Brand	LAI Games
Model	Stacker Giant
Category	Game Console
Language	English