Operator's Manual – Stacker Giant – SKILL
©
LAI GAMES
Page 11
FILLING CAPSULE DISPENSER
Stacker Giant also comes with capsule dispenser already fitted in the machine.
Machine operator will need to fill the dispenser with capsules as minor prize. To fill
the dispenser with capsules is as follows:
1. Open one of the main cabinet’s
front door and clear the front
display holder from any capsules
or balls.
2. Unscrew the two JP (+) M4 x
12mm bolts on both sides of the
display holder.
3. Take the display holder off from
the main cabinet so you can see
the inside of the capsule
dispenser.
4. Fill the dispenser with capsules
until it is full.
5. Put the display holder back to its
original position in the main
cabinet and re-tighten using the
bolts.
6. Place samples of capsules in the
display holder as a display.
* NOTE! *
You can also fill the dispenser from the back of the machine if accessible.
Highly recommended to use round capsule use diferrent shape may cause
jamming on capsule tray.